Fire Sticks Pellets - Full Pallet (65x15Kg)

Fire Sticks Pellets per full pallet: 65 bags of 15 kg

This is the stock that gets an average family through the heating season, and the most economical way to buy pellets per bag. Fire Sticks Pellets are ENplus A1 certified wood pellets made from 100% pure softwood, pressed from fully debarked stemwood.

A full pallet consists of 65 bags of 15 kg, totaling 975 kg.

Why a full pallet offers the best value per bag

Pellets are pressed, stacked, wrapped, and transported per pallet. The less handling and repacking required along the way, the lower the cost per bag, and we pass those savings directly on to you. Stocking up in spring or summer is usually cheaper than searching in November, when peak demand drives prices up.

How much is 975 kg in practice?

Using roughly one bag per heating day, 65 bags will last through most of a standard winter. If you heat exclusively with pellets in a well insulated home, one pallet is often enough. For larger or poorly insulated homes, plan for one and a half to two pallets per season. A full pallet provides roughly 4,500 to 4,900 kWh of heat energy, allowing easy comparison with your previous gas or heating oil bills.

A pallet without bark, meaning minimal ash

What sets Fire Sticks apart is not what is added to the pellet, but what is intentionally removed: the bark. The stemwood is fully debarked before being chipped and pressed. Bark contains most of the sand, minerals, and contaminants of the tree, making it the primary source of ash and clinker in your burn pot.

The raw material is 100% pure softwood, mainly spruce, sourced from timber processing residues that would otherwise go to waste. No chemical additives, starch, or binders are used: the pellets are bound purely by the natural lignin in the wood. The result is a clean, dry pellet that burns efficiently with minimal residue.

Also suitable for pellet boilers

Fire Sticks are suitable not only for pellet stoves, but also for pellet boilers and other central heating systems. For a boiler running continuously, low ash and dust content is crucial: less fouling on the heat exchanger means consistent efficiency throughout the season and less maintenance.

Delivery and unloading

The pallet arrives as a single unit weighing nearly a ton. Please ensure a paved, accessible drop-off location as close as possible to your storage area. Gravel driveways or soft verges are unsuitable for a pallet jack. If you prefer to move the bags over time, keep the pallet covered and store them away in stages.

Store dry, even after six months

Pellets are compressed wood and absorb moisture easily. Store them indoors, off the ground, in a well ventilated space away from damp walls or heat sources. A pallet kept in a dry garage over the summer remains in perfect condition for winter. Storing outside under a tarp often leads to condensation damage. For optimal performance, use the pellets within one year.

Need a smaller quantity instead?

If you lack space for a full pallet, check out the Fire Sticks Pellets half pallet with 33 bags. To test this brand in your stove first, order an individual Fire Sticks Pellets 15 kg bag.

Why choose Fire Sticks Pellets

Across a full pallet, consistency matters. Pellets with uniform length, moisture content, and density from the first bag to the sixty-fifth allow your stove to run on optimal settings. With Fire Sticks, debarked stemwood guarantees a clean burn season after season.

ENplus A1 is an enforced quality standard, setting strict limits on ash content, moisture, density, and dust levels while requiring full traceability. It is your guarantee that what goes into your stove matches the specifications on the bag.

Specifications Fire Sticks Pellets

• Product contents: full pallet (65 bags of 15 kg), total 975 kg

• Certification: ENplus A1

• Raw material: 100% pure softwood (spruce), stemwood completely debarked

• Diameter: 6 mm

• Length: 3.15 to 40 mm

• Moisture content: maximum 10%

• Ash content: maximum 0.7%

• Net calorific value: minimum 4.6 kWh/kg

• Bulk density: 600 to 750 kg/m3

• Free from chemical additives or binders